Direct Interface Bus (DIB) Intel® Stratix® 10 FPGA IP User Guide

Download PDF
ID 683142
Date 3/18/2021
Public
Document Table of Contents
Document Table of Contents x
1. About the DIB Intel® Stratix® 10 FPGA IP User Guide 2. About the DIB Intel® Stratix® 10 FPGA IP 3. Functional Description 4. Creating and Parameterizing the Intel FPGA IP 5. Designing with the DIB Intel® Stratix® 10 FPGA IP 6. DIB Intel® Stratix® 10 FPGA IP Interface 7. DIB Intel® Stratix® 10 FPGA IP Parameters 8. Document Revision History for the DIB Intel® Stratix® 10 FPGA IP User Guide A. Die-to-Die Mapping B. Example Pin Locations for One DIB Channel
2. About the DIB Intel® Stratix® 10 FPGA IP x
2.1. Release Information 2.2. Device Support for DIB Intel® Stratix® 10 FPGA IP 2.3. DIB Intel® Stratix® 10 FPGA IP Features 2.4. Latency
3. Functional Description x
3.1. Bypass Mode 3.2. Asynchronous Mode 3.3. Synchronous Mode
3.1. Bypass Mode x
3.1.1. AUX Channel Settings
4. Creating and Parameterizing the Intel FPGA IP x
4.1. IP Catalog and Parameter Editor 4.2. Creating a New Intel® Quartus® Prime Project 4.3. Parameterizing and Generating the IP 4.4. Compiling the DIB Intel® Stratix® 10 FPGA IP Design 4.5. Programming an FPGA Device
5. Designing with the DIB Intel® Stratix® 10 FPGA IP x
5.1. Reset Architecture 5.2. Clocking in Asynchronous and Synchronous Modes 5.3. Timing Closure 5.4. Setting Bypass, Asynchronous, and Synchronous Modes in One DIB Instance
5.2. Clocking in Asynchronous and Synchronous Modes x
5.2.1. Clocking Options 5.2.2. Clock Synchronization
5.3. Timing Closure x
5.3.1. Timing Transfer for Bypass Mode 5.3.2. Timing Transfer for TDM Modes
6. DIB Intel® Stratix® 10 FPGA IP Interface x
6.1. DIB Intel® Stratix® 10 FPGA IP Clocks 6.2. DIB Intel® Stratix® 10 FPGA IP User Interface Signals
1. About the DIB Intel® Stratix® 10 FPGA IP User Guide
2. About the DIB Intel® Stratix® 10 FPGA IP
3. Functional Description
4. Creating and Parameterizing the Intel FPGA IP
5. Designing with the DIB Intel® Stratix® 10 FPGA IP
6. DIB Intel® Stratix® 10 FPGA IP Interface
7. DIB Intel® Stratix® 10 FPGA IP Parameters
8. Document Revision History for the DIB Intel® Stratix® 10 FPGA IP User Guide
A. Die-to-Die Mapping
B. Example Pin Locations for One DIB Channel

5.4. Setting Bypass, Asynchronous, and Synchronous Modes in One DIB Instance

You may set each bank, in a channel of four banks, to different DIB modes.
However, be mindful of the following limitations:
  • If you set bank 0 to RX in Bypass mode, and any of the other banks to RX in Asynchronous or Synchronous mode, then pad_0_dib_pad[22] pin cannot be timed, and therefore cannot be used.
  • If you set bank 3 to TX in Bypass mode, and any of the other banks to TX in Asynchronous or Synchronous mode, then pad_3_dib_pad[22] pin cannot be timed, and therefore cannot be used.
Note: In these situations, the Intel® Quartus® Prime software displays a warning message in the parameter editor and flags a critical warning in the Fitter.
Level Two Title