Intel FPGA Integer Arithmetic IP Cores User Guide

Download PDF
ID 683490
Date 10/05/2020
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel FPGA Integer Arithmetic IP Cores 2. LPM_COUNTER (Counter) IP Core 3. LPM_DIVIDE (Divider) Intel FPGA IP Core 4. LPM_MULT (Multiplier) IP Core 5. LPM_ADD_SUB (Adder/Subtractor) 6. LPM_COMPARE (Comparator) 7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core 8. Intel FPGA Multiply Adder IP Core 9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core 10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core 11. ALTMULT_ADD (Multiply-Adder) IP Core 12. ALTMULT_COMPLEX (Complex Multiplier) IP Core 13. ALTSQRT (Integer Square Root) IP Core 14. PARALLEL_ADD (Parallel Adder) IP Core 15. Integer Arithmetic IP Cores User Guide Document Archives 16. Document Revision History for Intel FPGA Integer Arithmetic IP Cores User Guide
2. LPM_COUNTER (Counter) IP Core x
2.1. Features 2.2. Verilog HDL Prototype 2.3. VHDL Component Declaration 2.4. VHDL LIBRARY_USE Declaration 2.5. Ports 2.6. Parameters
3. LPM_DIVIDE (Divider) Intel FPGA IP Core x
3.1. Features 3.2. Verilog HDL Prototype 3.3. VHDL Component Declaration 3.4. VHDL LIBRARY_USE Declaration 3.5. Ports 3.6. Parameters
4. LPM_MULT (Multiplier) IP Core x
4.1. Features 4.2. Verilog HDL Prototype 4.3. VHDL Component Declaration 4.4. VHDL LIBRARY_USE Declaration 4.5. Signals 4.6. Parameters for Stratix V, Arria V, Cyclone V, and Intel® Cyclone® 10 LP Devices 4.7. Parameters for Intel® Stratix® 10, Intel® Arria® 10, and Intel® Cyclone® 10 GX Devices
4.6. Parameters for Stratix V, Arria V, Cyclone V, and Intel® Cyclone® 10 LP Devices x
4.6.1. General Tab 4.6.2. General 2 Tab 4.6.3. Pipelining Tab
4.7. Parameters for Intel® Stratix® 10, Intel® Arria® 10, and Intel® Cyclone® 10 GX Devices x
4.7.1. General Tab 4.7.2. General 2 Tab 4.7.3. Pipelining
5. LPM_ADD_SUB (Adder/Subtractor) x
5.1. Features 5.2. Verilog HDL Prototype 5.3. VHDL Component Declaration 5.4. VHDL LIBRARY_USE Declaration 5.5. Ports 5.6. Parameters
6. LPM_COMPARE (Comparator) x
6.1. Features 6.2. Verilog HDL Prototype 6.3. VHDL Component Declaration 6.4. VHDL LIBRARY_USE Declaration 6.5. Ports 6.6. Parameters
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core x
7.1. ALTECC Encoder Features 7.2. Verilog HDL Prototype (ALTECC_ENCODER) 7.3. Verilog HDL Prototype (ALTECC_DECODER) 7.4. VHDL Component Declaration (ALTECC_ENCODER) 7.5. VHDL Component Declaration (ALTECC_DECODER) 7.6. VHDL LIBRARY_USE Declaration 7.7. Encoder Ports 7.8. Decoder Ports 7.9. Encoder Parameters 7.10. Decoder Parameters
8. Intel FPGA Multiply Adder IP Core x
8.1. Features 8.2. Verilog HDL Prototype 8.3. VHDL Component Declaration 8.4. VHDL LIBRARY_USE Declaration 8.5. Signals 8.6. Parameters
8.1. Features x
8.1.1. Pre-adder 8.1.2. Systolic Delay Register 8.1.3. Pre-load Constant 8.1.4. Double Accumulator
8.1.1. Pre-adder x
8.1.1.1. Pre-adder Simple Mode 8.1.1.2. Pre-adder Coefficient Mode 8.1.1.3. Pre-adder Input Mode 8.1.1.4. Pre-adder Square Mode 8.1.1.5. Pre-adder Constant Mode
8.6. Parameters x
8.6.1. General Tab 8.6.2. Extra Modes Tab 8.6.3. Multipliers Tab 8.6.4. Preadder Tab 8.6.5. Accumulator Tab 8.6.6. Systolic/Chainout Tab 8.6.7. Pipelining Tab
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core x
9.1. Features 9.2. Verilog HDL Prototype 9.3. VHDL Component Declaration 9.4. Ports 9.5. Parameters
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core x
10.1. Features 10.2. Verilog HDL Prototype 10.3. VHDL Component Declaration 10.4. VHDL LIBRARY_USE Declaration 10.5. Ports 10.6. Parameters
11. ALTMULT_ADD (Multiply-Adder) IP Core x
11.1. Features 11.2. Verilog HDL Prototype 11.3. VHDL Component Declaration 11.4. VHDL LIBRARY_USE Declaration 11.5. Ports 11.6. Parameters
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core x
12.1. Complex Multiplication 12.2. Canonical Representation 12.3. Conventional Representation 12.4. Features 12.5. Verilog HDL Prototype 12.6. VHDL Component Declaration 12.7. VHDL LIBRARY_USE Declaration 12.8. Signals 12.9. Parameters
13. ALTSQRT (Integer Square Root) IP Core x
13.1. Features 13.2. Verilog HDL Prototype 13.3. VHDL Component Declaration 13.4. VHDL LIBRARY_USE Declaration 13.5. Ports 13.6. Parameters
14. PARALLEL_ADD (Parallel Adder) IP Core x
14.1. Feature 14.2. Verilog HDL Prototype 14.3. VHDL Component Declaration 14.4. VHDL LIBRARY_USE Declaration 14.5. Ports 14.6. Parameters
1. Intel FPGA Integer Arithmetic IP Cores
2. LPM_COUNTER (Counter) IP Core
3. LPM_DIVIDE (Divider) Intel FPGA IP Core
4. LPM_MULT (Multiplier) IP Core
5. LPM_ADD_SUB (Adder/Subtractor)
6. LPM_COMPARE (Comparator)
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core
8. Intel FPGA Multiply Adder IP Core
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core
11. ALTMULT_ADD (Multiply-Adder) IP Core
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core
13. ALTSQRT (Integer Square Root) IP Core
14. PARALLEL_ADD (Parallel Adder) IP Core
15. Integer Arithmetic IP Cores User Guide Document Archives
16. Document Revision History for Intel FPGA Integer Arithmetic IP Cores User Guide

8.6.4. Preadder Tab

Table 33.  Preadder Tab
Parameter IP Generated Parameter Value Default Value Description
Select preadder mode preadder_mode

SIMPLE,

COEF,

INPUT,

SQUARE,

CONSTANT

SIMPLE

Specifies the operation mode for preadder module.

SIMPLE: This mode bypass the preadder. This is the default mode.

COEF: This mode uses the output of the preadder and coefsel input bus as the inputs to the multiplier.

INPUT: This mode uses the output of the preadder and datac input bus as the inputs to the multiplier.

SQUARE: This mode uses the output of the preadder as both the inputs to the multiplier.

CONSTANT: This mode uses dataa input bus with preadder bypassed and coefsel input bus as the inputs to the multiplier.

Select preadder direction gui_preadder_direction

ADD,

SUB

ADD Specifies the operation of the preadder.
To enable this parameter, select the following for Select preadder mode:
  • COEF
  • INPUT
  • SQUARE or
  • CONSTANT
How wide should the C input buses be? width_c 1 - 256 16 Specifies the number of bits for C input bus.

You must select INPUT for Select preadder mode to enable this parameter.

Data C Input Register Configuration
Register datac input gui_datac_input_register

On

Off

 On Select this option to enable input register for datac input bus.

You must set INPUT to Select preadder mode parameter to enable this option.

What is the source for clock input? gui_datac_input_register_clock

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to specify the input clock signal for datac input register.

You must select Register datac input to enable this parameter.

What is the source for asynchronous clear input? gui_datac_input_register_aclr

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the datac input register.

You must select Register datac input to enable this parameter.

What is the source for synchronous clear input? gui_datac_input_register_sclr

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the datac input register.

You must select Register datac input to enable this parameter.

Coefficients
How wide should the coef width be? width_coef 1 - 27 18 Specifies the number of bits for coefsel input bus.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

Coef Register Configuration
Register the coefsel input gui_coef_register

On

Off

 On Select this option to enable input register for coefsel input bus.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

What is the source for clock input? gui_coef_register_clock

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to specify the input clock signal for coefsel input register.

You must select Register the coefsel input to enable this parameter.

What is the source for asynchronous clear input? gui_coef_register_aclr

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the coefsel input register.

You must select Register the coefsel input to enable this parameter.

What is the source for synchronous clear input gui_coef_register_sclr

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the coefsel input register.

You must select Register the coefsel input to enable this parameter.

Coefficient_0 Configuration coef0_0 to coef0_7 0x00000 – 0xFFFFFFF 0x00000000 Specifies the coefficient values for this first multiplier.

The number of bits must be the same as specified in How wide should the coef width be? parameter.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

Coefficient_1 Configuration coef1_0 to coef1_7 0x00000 – 0xFFFFFFF 0x00000000 Specifies the coefficient values for this second multiplier.

The number of bits must be the same as specified in How wide should the coef width be? parameter.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

Coefficient_2 Configuration coef2_0 to coef2_7 0x00000 – 0xFFFFFFF 0x00000000 Specifies the coefficient values for this third multiplier.

The number of bits must be the same as specified in How wide should the coef width be? parameter.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

Coefficient_3 Configuration coef3_0 to coef3_7 0x00000 – 0xFFFFFFF 0x00000000 Specifies the coefficient values for this fourth multiplier.

The number of bits must be the same as specified in How wide should the coef width be? parameter.

You must select COEF or CONSTANT for preadder mode to enable this parameter.

Level Two Title