Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 1/10/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.7.1. Functional Description

You can use the Parallel Flash Loader II Intel FPGA IP (PFL II) with an external host, such as the MAX® II, MAX® V, or Intel® MAX® 10 devices to complete the following tasks:

  • Program configuration data into a flash memory device using JTAG interface.
  • Configure the Intel® Stratix® 10 device with the Avalon® -ST configuration scheme from the flash memory device.
Note: Use the Parallel Flash Loader II Intel FPGA IP with the Avalon® -ST configuration scheme in Intel® Stratix® 10 devices, not the earlier Parallel Flash Loader IP.
Note: The current implementation does not support programming two QSPI devices with two separate PFL images in a single programming cycle. To program multiple QSPI devices, you must program each QSPI flash device with a single PFL image separately.
Note: The Parallel Flash Loader II Intel FPGA IP does not support HPS cold reset.
Note: The Parallel Flash Loader II Intel FPGA IP will not be able to drive the Avalon® streaming interface at the maximum throughput as described in Maximum Configuration Time Estimation .