AN 894: Signal Tap Tutorial with Design Block Reuse: for Intel® Cyclone® 10 GX FPGA Development Board

ID 683454
Date 11/11/2019
Public
Document Table of Contents

5.4. Step 4: Programming the Device and Verifying the Hardware

  1. Program the device, as Step 7: Programming the Device and Verifying the Hardware describes.
  2. After programming is complete, verify the following:
    • LEDs D21-D20 map to the blinking_led_top core
    • LEDs D19-D22 map to the top-level (root) design
    After configuring the FPGA, the blinking_led_top core flashes LEDs in a binary counting order. The top-level design shows a single bit shifting in green.