Intel® FPGA SDK for OpenCL™ Standard Edition: Programming Guide

ID 683342
Date 4/22/2019
Public
Document Table of Contents

4.6. Programming the Flash Memory (flash <device_name>)

If supported by a Custom Platform, invoke the flash utility command to initialize the FPGA with a specified startup configuration.
Note: For example instructions on programming the micro SD flash card on an SoC board such as the Cyclone® V SoC Development Kit, refer to the Writing an SD Card Image onto the Micro SD Flash Card section of the Intel® FPGA SDK for OpenCL™ Cyclone V SoC Getting Started Guide.
At a command prompt, invoke the aocl flash <device_name> <your_kernel_filename>.aocx command
where:

<device_name> refers to the acl number (for example, acl0 to acl31) that corresponds to your FPGA device, and

<your_kernel_filename>.aocx is the executable file you use to program the hardware.