Article ID: 000092076 Content Type: Error Messages Last Reviewed: 06/01/2023

Why does the error "Stratix® 10 is out of range" occur during E-Tile Hard IP for Ethernet Intel® FPGA IP generation?

Environment

  • Intel® Quartus® Prime Pro Edition
  • E-tile Hard IP for Ethernet Intel® FPGA IP
  • Red Hat Linux family*

    BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition Software v22.2,  you may see this error when the option " Enable AN/LT" is enabled to generate the E-Tile Hard IP for Ethernet Intel® FPGA IP for Intel Agilex® FPGA and only the Intel Agilex® FPGA device is installed.

     

    Resolution

    To work around this error, install the Intel® Stratix® 10 device library to the Intel® Quartus® Prime Pro Edition Software v22.2. 

    This problem is fixed starting with the Intel® Quartus® Prime Pro Edition Software version 22.4.

    Related Products

    This article applies to 1 products

    Intel Agilex® 7 FPGAs and SoC FPGAs