Article ID: 000088135 Content Type: Errata Last Reviewed: 02/14/2023

Why does the "o_rx_error" port of the E-Tile Hard IP for Ethernet Hard Intel® FPGA IP core not reflect oversized frames in transmission?

Environment

  • Intel® Quartus® Prime Pro Edition
  • E-tile Hard IP for Ethernet Intel® FPGA IP
  • OS Independent family

    BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a fault in the 100G E-Tile Hard IP for Ethernet Hard Intel® FPGA IP core RX status detection logic, you might observe oversized frames ( default maximum frame size in IP setting is 1518), fail to cause the relative bit of port o_rx_error to assert to reflect oversized frame behavior.

     

     

    Resolution

    There is no plan to fix this issue in future IP release. You can use statistic register(0x924/0x925) to monitor whether there is oversized frame in transmission.

    Related Products

    This article applies to 2 products

    Intel Agilex® 7 FPGAs and SoC FPGAs F-Series
    Intel® Stratix® 10 TX FPGA