Article ID: 000086252 Content Type: Troubleshooting Last Reviewed: 02/08/2023

Why does the LPM_ADD_SUB IP core generate incorrect results?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Generic Component
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition Software, you might get incorrect results in hardware when using the LPM_ADD_SUB IP core for Intel® Stratix® 10 devices. The problem occurs only when a pipeline stage of greater than 1 is used. The simulation yields correct results.

     

    Resolution

    To work around the problem, use the pipeline stage of 1 or 0.

     

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs