Article ID: 000082655 Content Type: Product Information & Documentation Last Reviewed: 03/16/2023

How can I reset the bitslip in the ALTLVDS_RX mega function in Arria® V and Cyclone® V devices?

Environment

  • Quartus® II Subscription Edition
  • Avalon ALTPLL
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    The rx_cda_reset input port of the ALTLVDS_RX malfunction is not supported in Arria® V GX, GT, SX, and ST devices and Cyclone® V devices beginning in the Quartus® II software version 12.1.  The bitslip, also referred to as the data alignment, is set to the zero latency position (reset) by asserting pll_areset.

    Note the RTL simulation model does not reset the bitslip when pll_areset is asserted.  This is an issue only with the RTL simulation model.  The RTL simulation model is scheduled to be fixed in a future version of the Quartus II software.

     

     

    Resolution

    The bitslip latency will be set to the zero position when pll_areset is asserted in gate level simulation, and in hardware.

    Related Products

    This article applies to 10 products

    Cyclone® V GX FPGA
    Arria® V GX FPGA
    Cyclone® V SX SoC FPGA
    Cyclone® V GT FPGA
    Arria® V SX SoC FPGA
    Arria® V GT FPGA
    Cyclone® V ST SoC FPGA
    Arria® V ST SoC FPGA
    Cyclone® V E FPGA
    Cyclone® V SE SoC FPGA