Article ID: 000081911 Content Type: Error Messages Last Reviewed: 04/11/2016

Error: native_10g_fechp_322_inst: The current value "continuous" for parameter "DFE adaptation mode" (rx_pma_dfe_adaptation_mode) is invalid. Possible valid values are: "".

Environment

  • Intel® Quartus® Prime Pro Edition
  • 1G 10GbE and 10GBASE-KR PHY Intel® Arria® 10 FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    You may see the above error in the Intel® Arria® 10 device 1G/10GbE and 10GBASE-KR PHY IP Parameter Editor Message Pane when Hard PRBS support is enabled when using the Intel® Quartus® Prime software version 15.1.2.

    Resolution

    This is a known problem in the Intel® Quartus® Prime software version 15.1.2. To work around this, you can download and install the patch below

     

     

    This problem has been fixed starting in v16.0 of the Intel® Quartus® Prime software.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs