Article ID: 000077441 Content Type: Troubleshooting Last Reviewed: 05/22/2017

Why do I see an unsupported slew rate setting of "slew_r7" in my Arria 10 device Native PHY IP?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Transceiver Native PHY Intel® Arria® 10 Cyclone® 10 FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    The Arria® 10 device Native PHY IP may show an incorrect slew rate setting of "slew_r7" in Quartus® Prime software versions earlier than 16.1.  

    Resolution

    This problem is fixed in Quartus Prime version 16.1 and later.

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs