Article ID: 000075709 Content Type: Product Information & Documentation Last Reviewed: 07/26/2006

How do I determine whether or not a look-up table (LUT) chain is implemented in a Stratix device in the Quartus II software version 2.0?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description In the Quartus® II software version 2.0, the Floorplan Editor does not graphically display the use of LUT chains in Stratix® devices. To determine if a logic element (LE) has implemented an LUT chain, do the following:

  1. Locate an LE in the Floorplan Editor.
  2. Right click on the LE and select Properties.
  3. In the window that appears, locate LUT Chain. Either a Yes or No will appear next to this field, indicating the use of a LUT chain.

 

Related Products

This article applies to 1 products

Stratix® FPGAs