What's New in Intel® Quartus® Prime Software
Power and Performance
Intel® Agilex™ Device Support
The v20.3 release of the Intel® Quartus® Prime Pro Edition Software provides support for the Intel® Agilex™ device family of FPGAs. These innovative FPGAs leverage heterogeneous 3D system-in-package (SiP) technology to integrate Intel’s first FPGA fabric built on 10nm process technology and 2nd Gen Intel® Hyperflex™ FPGA Architecture to deliver up to 40% higher performance or up to 40% lower power.1
The compiler in Intel® Quartus® Prime Pro Edition Software is a fast, multi-faceted tool, allowing different compilation strategies that meet the designer’s needs. In addition to standard compilation, which can give you a baseline for performance, there are other compilation options available:
- Fast compile for small designs, introduced in 20.3, can be used to get quick compiles at the beginning of the development process when only a small portion of the design has been implemented.
- High Effort compilation is used to make the compiler maximize its effort in order to get the best performance results out a of a design.
- Fast Preservation compilations can be used with partitioned designs. Using a previously satisfactory compilation, Fast preservation simplifies the logic of a preserved partition to only the interface between the partition boundary and the rest of the design. The use of Fast Preservation reduces the compile time required for the preserved partition and thus the overall compile time.
- Back Annotation is used in conjunction with seed sweeping to take the best compilation from run of different seeds and use that as the starting point for additional seed sweeping after fixing in place the results of pin-placement, clocks, RAMS, DSPs or a combination of these. The results are typically higher Fmax with less variation in results. Additionally, in 20.3, a GUI for Back Annotation has been provided to make it even easier to use.
- ECO compilation is used when only minor changes are needed to an otherwise good compile. This flow was introduced in 19.3 and has been enhanced in each release. ECO compiles can provide a compilation speedup of 5x – 10x.2 It is also replacing the Rapid Recompile flow for post-fit SignalTap changes with significant compilation speedup. For 20.3 the ability to place flipflops has been added to allow for a richer set of ECO options when doing development and debug.
Additionally, there are many other parameters available to customize your compilation strategies to meet your specific requirements.
Power and Thermal Calculator
The Power and Thermal Calculator (PTC) supports Intel® Agilex™ and Stratix® 10 FPGA devices. For these devices it replaces the older Early Power Estimator. It can be used inside the Intel® Quartus® Prime Pro Edition Software or as a standalone tool. In 20.3 the look and feel of the PTC has been improved allowing greater customization of the layout as well as tooltips to describe various parameters in the PTC. In 20.3 the Thermals tab has been introduced for Agilex™ devices, allowing the designer to do thermal analysis for the design and providing a method to obtain cooling solutions under various conditions.
Ease of Use
Platform designer has been enhanced to improve GUI performance in Intel® Quartus® Prime Pro Edition Software 20.3. New features have been added to allow for parameter support for HDL and Blackbox IP instantiations as well as the ability to pass parameters via RTL. The Avalon Multi-Master Pipeline Bridge now supports passing the writeresponsevalid signal back to the master component. Additionally, the Avalon ST credit flow control, which provides higher performance through source flow control has been updated.
Intel® Quartus® Prime Pro Edition Software continues to expand the rich set of compilation reports available. In the 20.3 release, several reports have been added or updated, including:
- Report timing extra info
- More information in Clock Transfers report
- Route net of interest
- Register spread
- Hierarchical retiming restrictions
- Pipelining information
This expanding portfolio of reports enables users to gather detailed information about routing, congestion, timing, tension, span, routing effort, and many other metrics that will provide rapid feedback for closing timing quickly.
Documentation and Support
Find technical documentation, videos, and training courses for Intel® Quartus®
Prime Design Software.
Product and Performance Information
This Comparison based on Intel® Agilex™ FPGA and SoC family vs. Intel® Stratix® 10 FPGA using simulation results and is subject to change. This document contains information on products, services and/or processes in development. All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest forecast, schedule, specifications, and roadmaps.
Intel® technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn more at intel.com.au, or from the OEM or retailer. No computer system can be absolutely secure. Performance varies by use, configuration and other factors. Learn more at www.Intel.com/PerformanceIndex.
Benchmarks were done on a suite of 28 designs on an Intel® Stratix® 10 1S280 device with Linux 64 operating system. Comparison is done between the baseline compile time and the ECO compile time after netlist changes (8 – 2000 depending on what was available for ECO changes). Tests document performance of components on a particular test, in specific systems. Differences in hardware, software, or configuration will affect actual performance. Consult other sources of information to evaluate performance as you consider your purchase. For general information about performance and benchmark results, visit http://www.intel.com.au/benchmarks.